Ceramic coating is a premium liquid polymer that chemically bonds with your car’s clear coat, forming a long-lasting shield that repels water, contaminants, and UV rays. Unlike waxes or sealants that wear off quickly, ceramic coating provides years of protection.
It delivers a deep, “wet look” gloss while making your vehicle easier to clean — dirt won’t stick as easily, bird droppings and tar are less likely to stain, and washing takes a fraction of the time. In short, the coating preserves your paint’s finish and reduces the need for constant detailing.

We exclusively use GTECHNIQ and Adam’s Polishes Graphene Coatings, two of the most advanced ceramic protection technologies available globally.

• GTECHNIQ (Crystal Serum) provides up to 5 years of proven protection and is known for its unmatched clarity, super‑slick feel, and extreme hydrophobicity.
• Adam’s Polishes Graphene Ceramic Coating adds graphene nanoparticles to the formula, enhancing heat dispersion and extending durability up to 9 years. It offers slightly higher chemical resistance and deeper gloss levels.
  Each coating is carefully chosen and applied by trained professionals under conditions that guarantee the best performance.

We offer both, but with guidance.

• In‑Shop Coating (Recommended): Our workshop in Baulkham Hills is equipped with controlled lighting, temperature regulation, and dust‑free zones — perfect conditions for precise and even coating application and curing.
• Mobile Ceramic Coating: Available for qualified clients with suitable conditions — an indoor garage, clean, enclosed space, and protection from direct sunlight and outdoor contaminants. We only accept mobile projects that meet those requirements, because we won’t compromise on quality or longevity.

When applied in‑shop, we can ensure a flawless finish, consistent curing, and full warranty protection.

Our goal is to deliver long‑term, high‑gloss protection that exceeds new‑car appearance standards. Each package includes:

• Full Exterior Detailing: Meticulous washing, clay bar decontamination, and surface preparation to remove old waxes and residues.
• Paint Correction: We machine polish the paint to eliminate swirl marks, light scratches, and oxidation — ensuring a smooth foundation.
• Professional Surface Prep: Using manufacturer-approved solutions such as GTECHNIQ PW Panel Wipe or Adam’s Surface Prep to promote perfect bonding.
• Application of Ceramic/Graphene Coating: Layered evenly across all exterior painted surfaces.
• High‑Spot Inspections: We examine every panel with precision lighting to detect and level any residue for a perfectly uniform finish.
• Sealant Finish: Application  Ceramic Sealant (for GTECHNIQ) or Graphene Detail Spray (for Adam’s) enhances initial gloss and water repellency.
• Final Inspection & Presentation: After curing, we thoroughly inspect the car’s finish to ensure a flawless, mirror-like appearance.

The base package covers the exterior paint only. Optional upgrades include:

• Interior Ceramic (Fabric or Leather) — protects seats from spills, stains, and dye transfer.
• Exterior Enhancements — glass, plastics, wheels, and trim ceramic coatings (for enhanced shine and easier cleaning).
• Other Add‑Ons: Engine bay detailing, wheel removal & deep cleaning, headlight restoration, and baby seat detailing.
  These upgrades allow full‑body protection customised to your vehicle and lifestyle.

• GTECHNIQ Ceramic Coating: from $990 (GST included)
• Graphene Coating: around $1,190
• Deluxe Graphene (Full Exterior + Trim + Wheels): around $1,990
  All prices reflect current discounts. Every package includes a paint correction process — we don’t cut corners because proper prep makes the difference between a coating that lasts months and one that lasts years.

We perform a thorough multi‑step surface correction:

1. Wash and clay‑towel to remove contaminants such as iron fallout and tar.
2. Machine polish (paint correction) to remove micro‑scratches and oxidation that would affect bonding.
3. Use a specialized panel wipe to remove oils and residues for a surgically clean surface.

The coating can then bond chemically to the paint, forming a single, durable layer that resists UV, contaminants, and water spot formation.

.

“High spots” occur when excess ceramic product dries unevenly, creating a faint patch or haze. At Detailing Dream Squad, we check your paintwork under different lighting angles to spot and level these areas before final cure. Correct technique during application and controlled curing conditions ensure a flawless, glass‑like finish on every panel.

You can safely drive 12–24 hours after the service. However, it’s essential to avoid rain, washing, or sun exposure for the first 24 hours so that the coating can cure fully. During this period, the coating chemically bonds with your paint and begins hardening.

Do not wash your car for the first 7 days. This waiting period allows the coating to form a strong, durable top layer that will protect your car long-term. After a week, hand-wash only using pH‑neutral shampoo, microfiber mitts, and gentle drying towels.

If the car gets wet during early curing, just allow it to dry naturally. Resist the urge to wipe the surface — friction could damage the still‑soft coating. Light moisture typically won’t harm it, as GTECHNIQ coatings begin curing rapidly after application, but the critical first 24 hours remain key for optimal results.

Maintenance is simple but crucial to longevity:

• Use only pH‑neutral soaps designed for coated vehicles.
• Wash every 2–3 weeks to remove environmental fallout.
• Avoid drive‑through car washes and harsh chemicals.
• Use two buckets (wash & rinse) with grit guards and clean microfiber towels.
• Top-up with a hydrophobic spray (GTECHNIQ C2V3 or C2V4) to keep extreme water beading and gloss.

.

Yes. Our clients enjoy exclusive maintenance plans:

• 3‑Month Touch‑Up: Ideal for cars driven daily or parked outdoors.
• 6‑Month Booster: Suited for weekend or garaged cars.
  Each appointment includes a safe wash, light inspection, and ceramic top‑up using the original brand’s booster (e.g. C2V3 or Graphene Boost Detail Spray). These visits keep your coating’s performance at its peak and protect your warranty.

• GTECHNIQ Ceramic Coating: up to 5 years
• Graphene Ceramic Coating: up to 9 years
  Proper washing, storage, and regular touch‑ups are what allow it to perform for the full duration. A neglected coating can still protect, but will gradually lose its slick finish and easy‑clean properties — that’s why our maintenance package matters.

Our coatings are warranted for the stated duration (5 or 9 years depending on package) under our maintenance program.
That means if you follow our 3‑ or 6‑month touch‑up schedule, we guarantee your coating will continue performing at its intended level. If any issues arise — loss of gloss, poor hydrophobic effect, or patching — our team inspects and restores it at no additional cost under warranty.

• Skipping the scheduled touch‑up services
• Using high‑pH detergents or automated car washes
• Improper washing tools causing swirl marks
• Applying incompatible waxes or sealants on top
  We’re transparent with these guidelines because proper care ensures your coating performs exactly as promised.

Simply contact us with your service record and we’ll arrange an inspection. If the issue relates to coating performance, we’ll perform a warranty restoration step — free of charge under your coverage terms..

For most vehicles:

• Standard Ceramic or Graphene: 1 day
• Deluxe Graphene (full exterior + wheels + glass): 2 days
  We never rush curing. For mobile jobs, the curing timeline can vary depending on weather conditions.

Booking is simple and flexible:

• You can book online anytime via our website or call us directly at 1300 029 142.
• Payment is accepted via cash or bank transfer upon completion of the service.
• If needed, we can provide invoice payment links for your convenience.
  We strive to make the process smooth and transparent, with no hidden fees.